1546 – Mobile Conveyor Operator Safety Training

Description

1546 – Mobile Conveyor Operator Safety Training

A.R.G. Construction, Safety & Health provides Mobile Conveyor Operator Safety Training designed to provide participants with the knowledge and practical understanding necessary to safely operate, position, inspect, and work around portable and mobile conveyor systems used in construction, material handling, warehousing, aggregate operations, recycling, manufacturing, agriculture, loading operations, and other applicable workplaces.

Mobile conveyors can expose workers to moving belts, rollers, pulleys, drive components, pinch points, nip points, falling material, electrical hazards, unexpected startup, equipment movement, and other serious hazards. This training program addresses equipment familiarization, inspection, guarding, positioning, material loading, emergency controls, electrical safety, energy control, pedestrian protection, manufacturer requirements, and operator responsibilities.

Course Topics Include:

• Introduction to Mobile Conveyor Safety
• Operator Responsibilities
• Portable and Mobile Conveyor Types
• Belt Conveyor Awareness
• Inclined Conveyor Awareness
• Telescopic Conveyor Awareness
• Loading / Unloading Conveyor Awareness
• Aggregate and Construction Conveyor Awareness
• Equipment Familiarization
• Manufacturer Instructions and Operator Manual
• Operating Controls and Instrumentation
• Start / Stop Controls
• Emergency Stop Systems
• Emergency Pull-Cord Awareness
• Warning Devices and Alarms
• Pre-Operation Equipment Inspection
• Belt Inspection
• Roller and Idler Inspection
• Pulley Inspection
• Drive-System Inspection
• Motor and Gearbox Awareness
• Guard Inspection
• Frame and Structural Inspection
• Wheel, Tire, Axle, or Track Inspection, as Applicable
• Hydraulic-System Inspection, When Applicable
• Electrical Cord and Connection Inspection
• Work-Area Inspection
• Conveyor Positioning
• Ground-Condition Assessment
• Equipment Stability
• Leveling and Support
• Outrigger / Stabilizer Awareness, When Equipped
• Slopes and Uneven Ground
• Equipment Movement and Relocation
• Safe Setup Procedures
• Overhead Clearance
• Power-Line Awareness
• Conveyor Capacity Awareness
• Material Flow
• Preventing Overloading
• Material Loading Procedures
• Material Discharge Procedures
• Feed-Point Hazards
• Discharge-Point Hazards
• Falling and Flying Material Hazards
• Material Spillage
• Housekeeping Around Conveyors
• Belt Tracking Awareness
• Moving Belt Hazards
• Rotating Component Hazards
• Nip-Point Hazards
• Pinch-Point Hazards
• Caught-In / Caught-Between Hazards
• Entanglement Hazards
• Drive Pulley and Tail Pulley Hazards
• Return Roller Hazards
• Guarding Requirements Awareness
• Importance of Maintaining Guards
• Prohibition Against Bypassing Safety Devices
• Keeping Hands, Feet, Clothing, and Tools Clear
• Loose Clothing and Jewelry Awareness
• Hair and Entanglement Hazards
• Pedestrian Safety
• Establishing Restricted Areas
• Interaction with Loaders, Forklifts, Trucks, and Other Equipment
• Communication Between Equipment Operators
• Safe Startup Procedures
• Startup Warning Awareness
• Verifying Personnel Are Clear Before Startup
• Normal Shutdown Procedures
• Emergency Shutdown Procedures
• Unexpected Startup Hazards
• Electrical Safety
• Temporary Power Awareness
• Extension Cord and Connector Awareness
• Grounding / Electrical Protection Awareness
• Wet-Location Electrical Hazards
• Hydraulic and Stored-Energy Hazards
• Gravity and Raised-Component Hazards
• Jam and Blockage Hazards
• Material Bridging Awareness
• Safe Jam-Clearing Principles
• Lockout / Tagout and Energy-Control Awareness
• Isolation of Electrical Energy
• Isolation of Hydraulic Energy
• Isolation of Mechanical and Gravity Energy
• Verification of Energy Isolation Awareness
• Maintenance and Servicing Restrictions
• Belt Adjustment and Tracking Restrictions
• Cleaning Around Moving Equipment
• Weather Conditions
• Wind Awareness
• Rain and Wet-Surface Hazards
• Dust and Airborne Material Awareness
• Noise Hazards
• Personal Protective Equipment Awareness
• Fire Prevention Awareness
• Equipment Malfunctions
• Removing Unsafe Equipment from Service
• Emergency Response
• Accident Prevention
• Operator Knowledge Review
• Practical Equipment Familiarization, as Applicable
• Operator Performance Evaluation, as Applicable

Training Discipline: Conveyor Systems, Material Handling & Machine Safety

Equipment: Mobile Conveyor / Portable Conveyor / Belt Conveyor / Telescopic Conveyor / Inclined Conveyor, as Applicable

Training Format: Training may include formal instruction, demonstrations, practical equipment familiarization, and evaluation of operator performance, as applicable to the equipment and workplace.

Guarding Safety Notice: Conveyor belts, pulleys, rollers, shafts, drive systems, and other moving components can create serious caught-in, entanglement, nip-point, and crushing hazards. Required guards and protective devices should remain properly installed and functional during operation.

Energy-Control Notice: Employees should not attempt to clear jams, remove obstructions, adjust belts, perform maintenance, or enter hazardous areas unless the equipment has been appropriately shut down and hazardous energy has been controlled in accordance with applicable procedures and requirements.

Unexpected Startup Notice: Conveyors should not be started until affected personnel are clear of hazardous areas. Operators should follow established startup procedures, warning practices, communication methods, and emergency-control procedures applicable to the equipment and workplace.

Material Handling Notice: Falling, shifting, or discharged materials can create struck-by hazards. Personnel should remain clear of loading and discharge areas and other locations where material can fall, spill, eject, or accumulate.

Mobile Equipment Interaction Notice: Mobile conveyors may operate near loaders, forklifts, trucks, excavators, and other equipment. Employers should establish appropriate traffic patterns, communication procedures, restricted areas, and separation between equipment and pedestrians.

Electrical Safety Notice: Electrically powered conveyors can present shock, electrocution, and fire hazards. Electrical equipment, cords, connectors, grounding, and power sources should be appropriate for the equipment and operating environment and maintained according to applicable requirements and manufacturer instructions.

Equipment-Specific Training Notice: Mobile conveyors vary significantly in controls, drive systems, dimensions, capacity, mobility, guarding, emergency controls, electrical systems, hydraulic systems, and operating characteristics. Operators should receive instruction and familiarization appropriate to the specific conveyor they are expected to operate.

Employer Responsibility Notice: Completion of an A.R.G. classroom or knowledge-based training component does not by itself authorize an individual to operate or service a conveyor. Employers remain responsible for determining applicable requirements and ensuring equipment-specific instruction, practical familiarization, evaluation, authorization, guarding, energy-control procedures, supervision, and documentation appropriate to the equipment, task, and workplace.

Training Certificate: Participants who successfully complete applicable training and evaluation requirements may receive an A.R.G. Construction, Safety & Health Certificate of Training documenting completion of the Mobile Conveyor Operator Safety Training program.

The certificate documents training completed and should not be represented as an OSHA-issued credential, governmental operator license, or governmental certification.

For course schedules, availability, pricing, and group training, contact sales@argcsh.org.