1537 – Rotating Telehandler Operator Safety Training

Description

1537 – Rotating Telehandler Operator Safety Training

A.R.G. Construction, Safety & Health provides Rotating Telehandler Operator Safety Training designed to provide participants with the knowledge and practical understanding necessary to safely operate rotating telescopic handlers used in construction, industrial, maintenance, material-handling, and other applicable operations.

Rotating telehandlers combine telescopic-boom material handling with a rotating upper structure and may be configured with forks, buckets, lifting attachments, work platforms, or other manufacturer-approved attachments. Their operating characteristics can differ significantly from conventional fixed-frame telehandlers and require equipment-specific training and evaluation.

This training program addresses equipment familiarization, pre-operation inspection, stability, rated capacity, load charts, boom extension and elevation, 360-degree rotation, stabilizers/outriggers, attachments, load handling, visibility, ground conditions, power-line hazards, manufacturer requirements, and operator responsibilities. Practical training and operator performance evaluation may be provided when applicable and when suitable equipment is available.

Course Topics Include:

• Introduction to Rotating Telehandler Safety
• Operator Responsibilities
• Rotating Telehandler Types and Configurations
• Differences Between Fixed-Frame and Rotating Telehandlers
• Equipment Familiarization
• Manufacturer Instructions and Operator Manual
• Operating Controls and Instrumentation
• Operator Cab and Restraint Systems
• Safety Devices and Operational Aids
• Pre-Operation Equipment Inspection
• Tire and Wheel Inspection
• Boom and Telescopic-Section Inspection
• Fork and Carriage Inspection
• Attachment Inspection
• Hydraulic-System Inspection
• Stabilizer / Outrigger Inspection
• Rotation and Slewing-System Awareness
• Workplace and Ground-Condition Inspection
• Travel-Route Inspection
• Identification of Operating Hazards
• Rated Capacity
• Capacity Charts and Load Charts
• Understanding Load-Chart Configurations
• Load Weight Determination
• Load Center Awareness
• Center of Gravity
• Equipment Stability Principles
• Effects of Boom Extension on Capacity
• Effects of Boom Elevation on Capacity
• Effects of Rotation on Capacity and Stability
• Effects of Attachments on Capacity
• Effects of Stabilizer / Outrigger Position on Capacity
• Tip-Over Prevention
• Ground-Bearing and Support Conditions
• Stabilizer / Outrigger Deployment
• Leveling and Setup Awareness
• Soft or Unstable Ground
• Slopes and Grades
• Drop-Offs and Excavation Edges
• Safe Boom Operation
• Boom Extension and Retraction
• Boom Raising and Lowering
• 360-Degree Upper-Structure Rotation
• Swing / Slew Radius Hazards
• Counterweight and Rear-Swing Hazards
• Crushing and Pinch-Point Hazards
• Keeping Personnel Clear of Rotating Equipment
• Fork Positioning
• Picking Up Loads
• Load Stability and Distribution
• Transporting Loads
• Elevating and Positioning Loads
• Placing Loads at Height
• Suspended Load Awareness
• Keeping Personnel Clear of Elevated and Suspended Loads
• Falling-Object Hazards
• Attachment Selection
• Manufacturer-Approved Attachment Awareness
• Fork Attachments
• Buckets and Material-Handling Attachments
• Jib and Lifting Attachment Awareness
• Work Platform / Personnel Platform Awareness
• Attachment Installation and Securement
• Quick-Coupler Safety
• Hydraulic Attachment Connections
• Safe Travel Procedures
• Travel with Boom and Load in a Safe Position
• Safe Travel Speed
• Turning and Steering
• Braking and Stopping Distance
• Restricted Visibility
• Backing and Reversing
• Pedestrian Safety
• Spotter and Ground-Person Communication
• Hand-Signal Awareness
• Work-Zone Traffic
• Interaction with Other Mobile Equipment
• Overhead Obstructions
• Electrical and Power-Line Hazards
• Minimum Approach-Distance Awareness
• Underground Utility Awareness During Stabilizer Setup
• Wind and Weather Conditions
• Reduced-Visibility Operations
• Parking and Securing Equipment
• Lowering Boom and Attachments When Parked
• Fueling / Charging Safety, as Applicable
• Hydraulic and Stored-Energy Hazards
• Equipment Malfunctions
• Removing Unsafe Equipment from Service
• Emergency Procedures
• Emergency Lowering Systems
• Maintenance and Servicing Awareness
• Accident Prevention
• Operator Knowledge Review
• Practical Operator Training
• Operator Performance Evaluation

Training Discipline: Telescopic Material Handler & Mobile Equipment Safety

Equipment: Rotating Telehandler / Rotating Telescopic Handler / 360-Degree Telehandler, as Applicable

Training Format: Training may include formal instruction, demonstrations, practical equipment training, and evaluation of operator performance, as applicable.

Practical Training: Operator qualification should include practical training on a rotating telehandler representative of the equipment the participant is expected to operate. Training should address controls, steering, braking, boom functions, rotation, stabilizers/outriggers, capacity charts, attachments, load handling, workplace conditions, and other equipment-specific operating characteristics.

Load Chart & Capacity Notice: Rotating telehandler capacity can change significantly based on boom length, boom angle, operating radius, direction of rotation, stabilizer/outrigger configuration, attachment, load center, machine configuration, and other factors. Operators should understand and follow the manufacturer’s applicable load charts and operating limitations.

Rotation Safety Notice: Rotation of the upper structure creates swing-radius, counterweight, crushing, struck-by, and stability hazards that may not be present to the same extent on conventional fixed-frame telehandlers. Personnel should remain clear of the machine’s rotating structure and operating envelope.

Stabilizer / Outrigger Safety Notice: When stabilizers or outriggers are required, operators should verify suitable ground conditions and follow manufacturer requirements for deployment, leveling, support, and configuration. Stabilizers should not be placed near unsupported edges, voids, underground hazards, or unsuitable surfaces without appropriate controls.

Attachment Notice: Attachments can change equipment capacity, load center, stability, operating characteristics, and applicable requirements. Only attachments approved or permitted for the equipment and application should be used in accordance with manufacturer instructions and applicable requirements.

Suspended Load / Crane-Function Notice: Certain rotating telehandler configurations and uses may involve suspended loads or functions that can trigger additional requirements under applicable crane, hoisting, or construction standards. Completion of this course should not be represented as crane operator certification or as satisfying every qualification or certification requirement that may apply to a specific lifting operation.

Personnel Platform Notice: Use of a rotating telehandler to elevate personnel can involve additional equipment, platform, fall-protection, operating, and regulatory requirements. General telehandler operator training alone should not be represented as satisfying all requirements applicable to personnel-elevating operations.

Power-Line Safety Notice: Contact with or proximity to energized electrical lines can result in serious injury or death. Operators and employers should identify electrical hazards and comply with applicable clearance, planning, and protective requirements before operating the boom or equipment near power lines.

Equipment-Specific Training Notice: Rotating telehandlers vary significantly in controls, load charts, stabilization systems, attachments, boom capabilities, rotation limits, safety systems, and operating characteristics. Operators should receive instruction and familiarization appropriate to the specific make, model, configuration, and attachments they are expected to operate.

Employer Responsibility Notice: Completion of an A.R.G. classroom or knowledge-based training component does not by itself authorize an individual to operate a rotating telehandler. Employers remain responsible for determining applicable regulatory and manufacturer requirements and for ensuring equipment-specific instruction, practical training, evaluation, authorization, and documentation appropriate to the equipment, attachments, tasks, and workplace.

Training Certificate: Participants who successfully complete applicable training and evaluation requirements may receive an A.R.G. Construction, Safety & Health Certificate of Training documenting completion of the Rotating Telehandler Operator Safety Training program.

The certificate documents training completed and should not be represented as an OSHA-issued card, governmental operator license, crane operator certification, or governmental certification.

For course schedules, availability, pricing, and group training, contact sales@argcsh.org.